It is a dedicated kit for PowerMac9600 (8600) using ATX PSU. Eliminates the capacity shortage of the genuine power supply when using the accelerator card. For ATX PSU, you can use types such as Seasonic and AcBel that have a vertical power inlet in the center.
ATX PSU and PM9600(8600) chassis can be installed without modification using a special bracket, so even if you use a new PSU with a warranty, you can use it while taking advantage of the warranty. No more needlessly chopping up your Mac.
*Prepare ATX PSU and tools by yourself.
Standard Kit : Includes everything you need except ATX-PSU and tools. ATX 24-pin Extended Cable, 10-Pin molex Female housing, Beezul-Bulb PFW, 1KResister, Diode, 3D-printed Mount bracket, 1x Earthing screw.
/36 USD
Pre-assembled Standard Kit: Same as the Standard Kit, but all cables and soldering are already done. This is a tedious task no matter who does it, but we will carefully complete the work and confirm that it works before sending you the product.
*You will be responsible for installation./65 USD
Beezul-Bulb PFW: A set of small PCBs, diodes and resistors required for Mac soft switching. requires a lot of knowledge. *And it can be used with almost any Mac that uses a softswitch.
/8 USD
See Instructions of my blog here!
https://ameblo.jp/keroxiee1016/entry-12756425050.html
ATX2PM9600 PSU Conversion Kit
You will need to be very careful as you will be working with the power supply. Even if you get an electric shock, or in the worst case, even if it causes a death accident or fire, we do not take any responsibility. Please do so at your own risk.